Märklin IC2 Type DBpbzfa 668.2 Bi-Level Cab Control Car, 2nd Class scale model part/accessory Passenger car

The minimum radius for operation is 360 mm / 14-3/16". There is a low entry between the trucks. The car has factory-installed LED interior lighting on both levels and a current-conducting, operating close coupler on the end of the car without a cab. The car has a lighted train destination display on the end above the cab and it can be turned off separately in digital operation. The car has lighted train destination displays on the sides. The interior lighting and the train destination displays on the sides can be turned on and off digitally in conjunction with the other bi-level intermediate cars with the decoder in the cab control car. A fixed, defined sequence of cars is assigned to do this. Triple headlights and dual red marker lights change over with the direction of travel and can be controlled separately in digital operation. Long-distance headlights can also be controlled separately in digital operation. The light changeover, interior lighting, and the train destination displays on the sides will work in conventional operation. A standard coupler can be used on the cab end of the cab control car by removing a piece of skirting, thus allowing a locomotive to be coupled to it. There are red transparent marker light inserts at the end of the car without a cab. The car has prototypical Görlitz design trucks. Length over the buffers 29.2 cm / 11-1/2". The class 146.5 electric locomotive to go with this car can be found in the Märklin H0 assortment under item number 37449. Item numbers 43486, 43487, 43488, 43489, and 43490 can be used to form a prototypical 6-part train unit with bi-level cars. It may be necessary to make appropriate modifications to curved bridge ramps before running this car on them. This model can be found in a DC version in the Trix H0 assortment under item number 23255.