Active Ethernet I/O with 6 digital inputs and 6 relay outputs Moxa's ioLogik E2214 is a new type of active micro controller that can be used as an RTU (Remote Terminal Unit). Active Ethernet micro controllers are a kind of PC-based data acquisition and control device that use proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa's Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Active Ethernet micro controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods. Features and Benefits: - Front-end intelligence that supports 24 Click&Go™ rules; - Active Messaging with real-time stamp, including SMS, SNMP Trap with I/O status, TCP, and email; - Supports SNMPv1/v2c/v3 protocol; - I/O peer-to-peer function; - Built-in web console; - PC utility: Auto detection of installed modules; - Windows/WinCE VB/VC.NET and Linux C APIs. More information: Features | Channels quantity | 12 channels | ![](/p.gif) | Isolation | 3 kV | Other features | Channel type | Relay channel | ![](/p.gif) | Signal direction | Input/output | ![](/p.gif) | Cable type | AWG | ![](/p.gif) | Electrostatic Discharge (ESD) protection | 15 kV | ![](/p.gif) | Module type | Digital | ![](/p.gif) | Ethernet LAN (RJ-45) ports | 1 | ![](/p.gif) | Serial interface type | RS-485 | ![](/p.gif) | Dimensions (WxDxH) | 115 x 79 x 45.63 mm | ![](/p.gif) | Current | 5 A | ![](/p.gif) | Power consumption | 282 mA | ![](/p.gif) | Relative humidity | 5 - 95 % | ![](/p.gif) | Supported network protocols | Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, CGI, SNTP |
|