The Einhell GE-DW 1155 N-A deep well pump with automatic function switches the device on automatically when water is required and switches it off again automatically if the withdrawal of the water is interrupted. The pump has an 8-stage impeller system to generate the pressure required for pumping clean water from deeper lying water reservoirs and wells up to a maximum height of 55 m. Thanks to the automatic function and the high delivery pressure, this pump is ideally suitable for garden watering systems and for domestic water supplies, especially for toilet flushing systems, washing machines or even washing the car. Its compact and slimline design makes it suitable for use in constricted pipes as well. The maximum immersion depth is 19 meters and for flexible use the pump has a 22 meter power cable and a holding rope included with it. With a powerful 1100 W motor the pump generates a maximum delivery rate of up to 6,000 liters per hour. The submersible pressure pump not only gives a solid impression on the outside, it is particularly robust in design and has important safety features. The housing and dirt screen made of rust-proof stainless steel, the pressure connector with stainless steel insert and the mechanical seal provide the basis for a long service life. The integrated dry-run safeguard protects the pump against damage if the water supply is interrupted. The hose connection, with a size of 33.3 mm (1" male thread), is easily accessible on the top of the pump. The integrated non-return valve here prevents the water flowing back. 8-speed pump drive With 8 impellers, the multi-stage pump drive pumps up to 6000 litres per hour with up to 5.5 bar maximum pressure. Robust stainless steel Both the housing of the pump and the threaded connections are made of robust stainless steel. Accessible connection The hose connection is easily accessible on the top of the pump's stainless steel housing. Dry-run protection The pump switches on and off automatically, and is also protected by dry-run protection. Robust stainless steel pump Slim, powerful deep well pump for clear water supply The Einhell deep well pump GE-DW 1155 N-A is a 1,100 W clear water pump with stainless steel housing and, with a max. delivery height of 55 m, it is suitable for use in lower and narrow water reservoirs and wells. The powerful pump delivers up to 6000 litres of water per hour at 5.5 bar and is therefore also ideally suited for supplying water sprinklers. More information: Features | Proper use | Water-supply | | Suitable for outdoor use | Yes | | Product colour | Stainless steel | | Housing material | Stainless steel | Weight & dimensions | Weight | 10150 g | | Diameter | 98 mm | Ports & interfaces | Cable length | 22000 m | | Connecting thread type | G1 | Performance | Maximum operating pressure | 5.5 bar | | Maximum delivery height | 55 m | | Flow rate | 6000 l/h | | Maximum input water temperature | 35 °C | Packaging data | Package width | 226 mm | | Package depth | 220 mm | | Package height | 950 mm | | Package weight | 15400 g | Power | Power | 1100 W | | Power source type | AC | | AC input voltage | 220 - 240 V | | AC input frequency | 50 Hz |
|