NPort® P5150A device servers are designed to make serial devices network-ready in an instant. It is a PD device and is IEEE 802.3af compliant, so it can by powered by a PoE PSE device without an additional power supply. Use the NPort® P5150A device servers to give your PC software direct access to serial devices from anywhere on the network. The NPort® P5150A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible. Surge-protected Serial, Ethernet, and Power Lines Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort® P5150A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions. 3-step Web-based Configuration The NPort® P5150A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort® P5150A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort. Easy to Troubleshoot NPort® P5150A device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change. More information: Packaging content | User guide | Yes | Technical details | Serial ports quantity | 1 |  | Serial interface type | RS-232/422/485 | | Isolation | 1.5 kV | | Surge protection voltage | 2 kV | | Ethernet LAN data rates | 10,100 Mbit/s | | Electrostatic Discharge (ESD) protection | 8 kV | | Networking standards | IEEE 802.3af | | Flow control support | Yes | | Baud rate | 921.6 Kbit/s | | RS-232 signals | CTS,DCD,DSR,DTR,GND,RTS,Rx,Tx | | RS-422 signals | GND,RxD-,TxD+,TxD- | | RS-485 signals | Data+,Data-,GND,RxD+,RxD-,TxD+,TxD- | | Auto MDI/MDI-X | Yes | | Data bits | 5,6,7,8 | | Flow Control type | RTS/CTS,XON/XOFF | | Stop bits | 1,1.5,2 | | Mean time between failures (MTBF) | 2231530 h | Ports & interfaces | Ethernet LAN (RJ-45) ports | 1 | | Cabling technology | 10/100Base-T(X) | Design | Product colour | Black | | Housing material | Metal | | Electrostatic Discharge (ESD) protection (air) | 8 kV | | Electrostatic Discharge (ESD) protection (contact) | 4 kV | | Safety | UL 60950-1 | Power | Power source type | DC, PoE | | Input voltage | 12 - 48 V | | Power consumption | 180 mA | Protocols | Supported network protocols | ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, ARP | Software | Windows operating systems supported | Yes | Weight & dimensions | Dimensions (WxDxH) | 100 x 111 x 26 mm | | Weight | 300 g | Operational conditions | Operating temperature (T-T) | 0 - 60 °C | | Storage temperature (T-T) | -40 - 75 °C | | Operating relative humidity (H-H) | 5 - 95 % |
|