| ![](/p.gif) |
![](/p.gif) |
| Item number: C4276-23271.0005 Manufacturer no.: 23271.0005 EAN/GTIN: 4030618287476 |
| | |
|
| ![](/p.gif) | ![](/p.gif) |
![](/p.gif) | The eccentric clamp allows clamping with pull-down effect on different workpiece forms at low height. Material - Case-hardened steel, case-hardened and blue zinc-plated
Assembly - Manufacture a thread with the corresponding distance L2 / L3 to the workpiece.
- Screw in the eccentric clamp at the necessary height and set it relative to the workpiece with its flat side.
- Insert the workpiece and tighten the clamping pin using the internal hexagon. The proper tension is achieved after approx. 1/3 turn.
The threaded hole must be lubricated on a regular basis. The rotational movement during tightening must always be completed towards the stops in order to prevent the workpiece from turning away from the stops. More information: ![](/p.gif) | ![](/p.gif) | Nominal dimension: | d1=M5 | Conflict Minerals free: | Free from Conflict Minerals | Prop65: | Contains Proposition 65 substances | REACH compliant: | Contains SVHC substances >0,1% w/w | RoHS-compliant: | RoHS compliant | d2: | 10.9 mm | l1: | 10 mm | l2: | 4 mm | s1: | 5.7 mm | s2: | 5 mm | s3: | 3.5 mm | d1: | M5 | Tightening torque: | 2 Nm | L1: | 5 mm | L2: | 4.2 mm | L3 [±0.2]: | 5.2 mm | WS: | 3 mm | Clamping force: | 0.1 kN | Material: | Case-hardened steel, case-hardened and blue zinc-plated | Branch: | machine construction, general | measuring and control devices | adaptions, toll manufacturing | plant, apparatus and equipment construction | foundry machinery, foundries | Function: | clamp | fasten | Preferential Origin: | D | Weight: | 2.8 g |
|
| ![](/p.gif) | ![](/p.gif) |
![](/p.gif) | | ![](/p.gif) | ![](/p.gif) |
| |