The only construction laser with a red laser beam that allows you to adjust the visibility of the laser line in two stages.
With our best laser receiver.
The hedue E4 laser detector with a mm display for quickly measuring and correcting height differences. The large reception range of 127 mm is an additional help.
Working outdoors with laser class II.
A rotating laser is usually used outdoors with a laser detector. The weaker laser class II, with a maximum light output of 1 mW, is completely sufficient here and is also received by the laser detector up to a distance of 250 m. A higher light output may not usually be used outdoors.
Better visible laser line indoors with laser class 3R.
But do you like working indoors without a laser detector? By pressing a single button, you can switch the hedue Q3 rotating laser to the more visible laser class 3R. You will see a much brighter laser line and can often work faster without a laser detector.
QR code on the device.
The robust hedue Q3 construction laser is precise with a levelling accuracy of 1 mm at 10 m. You can rely on this, because we at hedue in Germany calibrate every rotating laser before delivery. You can retrieve the certificate via the QR code affixed to the device.
Enough power for long working days.
The hedue Q3 rotating laser is powered by a 4,800 mAh NiMH battery pack. This is sufficient for a running time of 20 hours and can be recharged overnight using the charger supplied.
Simple operation.
This rotating laser has radically simplified operation. There are only three buttons on the construction laser itself: on/off, anti-shake and a button for selecting the laser class. Additional functions are only provided with the remote control. This makes it possible for an occasional user to leave the device without the remote control. You then have the security of knowing that the device can only be operated in self-levelling rotation. Incorrect measurements caused by incorrect operation are then ruled out.
Features
- Laser class switchable between class II and 3R.
- Horizontal and vertical self-levelling by servomotors up to 5° inclination.
- Rainproof housing.
- Tracking of laser lines with the line function S2/S3.
- Manual tilting of the X and Y axis.
- Display of slopes by switching off the self-levelling function.
- Avoidance of measuring errors through a warning signal when leaving the self-levelling range.
- Can be used on tripods and wall mounts with 5/8" thread.
- Tested accuracy with free certificate on the device. (QR Code readable with smartphone.)
- Longer mileage and increased safety with the pause button.
- Working in bright light and at long distances in conjunction with laser detectors.
- Additional reference beam
- Supplied in the systainer transport and storage system. Includes laser detector with holder, remote control, charger and rechargeable battery.
- The digital laser detector shows the height difference to the laser line in mm or inches.
Specifications
- Working area with laser detector 500 m
- Self-levelling range horizontal 5°
- Vertical self-levelling range 5°
- Tilt angle 10%
- Levelling accuracy 1 mm / 10 m
- Rotation speeds rpm 600
- Laser class II,3R
- Laser Diode 635 nm
- Opening angle of the line function 10°, 25°, 50°
- IP protection class IP54
- Remote control reception range 20 m, 360°
- Battery NiMH
- Operating time in hours 20
- Tripod thread 5/8"
- Operating temperature -20°C - +50°C
- Power plug Typ C
Scope of delivery
- systainer T-Loc III
- Laser detector hedue E4 (red)
- Remote control
- Battery
- Battery charger
- QuickstArt
- Test certificate
