![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) |
Picture | | | | Order |
![](/p.gif) |
|
|
Gedore 6057270 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 21.97* per piece |
|
|
Gedore 6063750 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.18* per piece |
|
|
Gedore 6129440 screwdriver bit (1 offer) 1/4" and 1/2" sockets for protruding and recessed TORX® screws. In Gedore blue sheet steel case. Dimensions: 320 x 210 x 55 mm. TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA. |
|
from € 358.20* per piece |
|
|
Gedore 6063910 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.17* per piece |
|
|
Gedore 6124560 screwdriver bit (1 offer) With pressed-in pin. With square drive according to DIN 3120 - C 12.5, ISO 1174, with ball groove. Tip Gedore vanadium special steel. VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-pl... |
|
from € 35.22* per piece |
|
|
Gedore 6057780 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 24.30* per piece |
|
|
Gedore 6129950 socket wrench (1 offer) Acc. to DIN 3123, ISO 3316. For hand-operated sockets with square drive as per DIN 3120, ISO 1174, with ball locking device. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 25.06* per piece |
|
|
Gedore 6064130 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.94* per piece |
|
|
|
|
from € 44.39* per piece |
|
|
|
|
from € 168.33* per piece |
|
|
Gedore 8843670 punch/nail set/drift (1 offer) Chrome-molybdenum-vanadium air hardening steel 45CrMoV7. Carefully hardened and tempered along the full length. Striking heads inductively tempered. Working edge polished and clear varnished. |
|
from € 22.83* per piece |
|
|
Gedore 6138510 screwdriver bit (1 offer) For recessed TORX® screws, short and long. In Gedore blue sheet steel case. Dimensions: 320 x 210 x 55 mm. TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA. |
|
from € 228.86* per piece |
|
|
Gedore 6064480 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.96* per piece |
|
|
Gedore 6143270 torque wrench (1 offer) Acc. to DIN 3122, ISO 3315. For hand-operated sockets with square drive as per DIN 3120, ISO 1174, with ball locking device. Gedore vanadium steel 31CrV3, polished, chrome-plated. |
|
from € 19.61* per piece |
|
|
Gedore 6142620 torque wrench (1 offer) Particularly for the demanding use experienced in industry and with utility vehicles. Acc. to DIN 3122, ISO 3315. With recessed lever change. Push-button release. Return angle 7.5 degrees. Non-slip... |
|
from € 67.33* per piece |
|
|