|  | | | | | | | | Picture | | | | Order | | | 100% |
|
Current Transformer, Channels 3, 60 A (1 offer) Current Transformer, Frequency: 45...65 Hz, Hole size: 9.6 mm, Suitable for: EM271, Connection: RJ11, Mounting: Cable, Cable length: 80 cm |
Carlo Gavazzi TCD0M6080CMX |
from € 139.57*
per piece |
| 100% |
|
|
|
from € 296.66*
per piece |
| 100% |
|
|
|
from € 45.93*
per piece |
| 100% |
|
|
|
from € 47.80*
per piece |
| 100% |
|
|
|
from € 594.29*
per piece |
| 100% |
|
|
|
from € 53.23*
per piece |
| 100% |
|
|
|
from € 89.14*
per piece |
| 100% |
|
|
|
from € 917.71*
per piece |
| 100% |
|
Cylinder 570 mm ø32 mm 0.1...0.8 MPa 100...1000 mm/s (1 offer) Cylinder, Operating pressure: 0.1...0.8 MPa, Operating temperature: +5...+60 °C, Piston speed: 100...1000 mm/s, Air connection: G1/8/M6, Cylinder type: Cylinder with actuating band, Function: doubl... |
|
from € 293.36*
per piece |
| 100% |
|
DC duplicator (1 offer) DC duplicator, Dimensions W x H x D: 17.5 x 100 x 112 mm, Operating temperature: -10...-65 °C, Operating voltage, AC: 19...28 VAC, Operating voltage, DC: 10...40 VDC, Reaction time: 25 ms, Input, u... |
|
from € 185.87*
per piece |
| 100% |
|
DC geared motor 451:1 24 VDC (1 offer) DC geared motor, Dimensions ø x L: 36.8 x 64 mm, Dimensions, flange W x H: 39 x 39 mm, Dimensions, shaft ø x L: 4 x 10 mm, Rotational speed: 7.8 min-1, Reduction ratio: 451:1, Rated torque: 150 Nmm... |
|
from € 69.12*
per piece |
| 100% |
|
DC motor, 16 mm, with gear drive, 16 mm (1 offer) DC motor, 16 mm, with gear drive, Dimensions ø x L: 16 x 48.2 mm, Rotational speed: 150 min-1, Reduction ratio: 84, Rated torque: 0.162 Nm, Rated voltage: 24 VDC |
|
from € 151.84*
per piece |
| 100% |
|
DC motor, 22 mm, 22 mm (1 offer) DC motor, 22 mm, Dimensions ø x L: 22 x 32 mm, Resistance technical notation: 5R95, Rotational speed: 10200 min-1, Holding torque: 22.0 Nmm, Offset coefficient: 477 min-1 Nmm-1, Rated torque: 7.43 ... |
|
from € 74.48*
per piece |
| 100% |
|
DC motor, 22 mm, 22 mm (1 offer) DC motor, 22 mm, Dimensions ø x L: 22 x 32 mm, Resistance technical notation: 21R8, Rotational speed: 10500 min-1, Holding torque: 23.4 Nmm, Offset coefficient: 462 min-1 Nmm-1, Rated torque: 7.56 ... |
|
from € 87.31*
per piece |
| 100% |
|
DC motor, 22 mm, with gear drive, 22 mm (1 offer) DC motor, 22 mm, with gear drive, Dimensions ø x L: 22 x 61.4 mm, Rotational speed: 540 min-1, Reduction ratio: 19, Rated torque: 0.099 Nm, Rated voltage: 12 VDC |
|
from € 178.28*
per piece |
| |
|
