![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) |
| Picture | | | | Order |
![](/p.gif) |
99% |
|
Jaw Sets for Five-Sided Machining | 1704.300 (1 offer) Pull-down elements suitable for clamping and pulling unmachined clamping surfaces down onto the guideway or onto the 90-mm support plates supplied This way workpieces can be clamped almost exactly ... |
|
from € 1,326.66* per piece |
|
99% |
|
Gripper Strips, reversible | 1704.400 (1 offer) Gripper strip can be reversed for mounting on the five-sided machining jaw (4 of them are required) For clamping unmachined parts close to the edge, 3 or 5 mm Incl. 2 mounting screws M 6 x 16 each ... |
|
from € 141.31* per piece |
|
99% |
|
Insertable Plates | 1704.500 (1 offer) Three support heights For levelling the workpiece on the five-sided machining jaws Ground to high accuracy Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600) This product is supplied a... |
|
from € 168.90* per piece |
|
99% |
|
Insertable Plates | 1704.510 (1 offer) Three support heights For levelling the workpiece on the five-sided machining jaws Ground to high accuracy Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600) This product is supplied a... |
|
from € 167.37* per piece |
|
99% |
|
Insertable Plates | 1704.520 (1 offer) Three support heights For levelling the workpiece on the five-sided machining jaws Ground to high accuracy Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600) This product is supplied a... |
|
from € 162.94* per piece |
|
99% |
|
Jaws for Five-Sided Machining/Jaw, fixed | 1704.100 (1 offer) Particularly suitable for five-side machining Better accessibility for tools Ground clamping surfaces Additional thread for parallels Accuracy through pull-down Stability through form-locking Mater... |
|
from € 690.06* per piece |
|
99% |
|
|
|
from € 687.56* per piece |
|
99% |
|
|
|
from € 2.64* per piece |
|
99% |
|
|
|
from € 116.61* per piece |
|