02058  (206 offers of 2,483,342 product items)

Studs combined with T-nuts DIN 508 (EH 23010./23020.), fixture nuts DIN 6330 (EH 23070.) and plain washers DIN 6340 (EH 23060.) become complete clamping studs. These studs are characterised by the ...

The support legs are universally usable as adjustable legs. The plate is screwed to the threaded pin and nut by a stainless steel fastening screw, and is also glued. Material Grub Screw Steel, zinc...

Swing bolts similar to DIN 444 however, steel design with higher quality 8.8. The stainless steel A2-50 design has a tensile strength of min. 500 N/mm2. Material Heat-treated steel, tempered, quali...

T-bolts when combined with DIN 6330 fixture nuts (EH 23070.) and DIN 6340 plain washers (EH 23060.) become complete clamping bolts. These T-bolts are characterised by the rolled thread. Material He...

Adjustable flat tension levers are used when the swivel range is limited or a specific lever position is required. Adjustable flat tension levers are characterised by their low construction height ...

Material Axle part Steel, blackened Handle Thermoplastic, black, dull Handle body Aluminium, plastic coated, similar to RAL 9006 silver, structural matt Covering Plastic, light grey Operation In th...

Adjustable hinges can be positioned horizontally or vertically by moving the adjusting bushings in a form-fit and finely adjusted manner. Material Body Zinc die-cast, plastic coated, black, similar...

Material Stainless steel 1.4305 Assembly Form B: after being bored through the pin hole is to be situated within the tolerance field H7. Notes Knurling pitch and knurling depth may differ from DIN.

Material Bushing Stainless steel 1.4305 Handle Thermoplastic PA, black

These nuts for T-slots (slot nuts) are manufactured according to DIN 508. The range is extended by other dimensions that are not included in DIN. Material Heat-treated steel, tempered, quality 10, ...

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Spring plungers can be used for locating or for applying pressure, as a detent or for ejection. Material Body Stainless steel 1.4305 Ball Stainless steel, hardened Spring stainless steel Characteri...

Spring plungers can be used for locating or for applying pressure, as a detent or for ejection. The running of the ball minimises wear on the counterpart, this also results in a positive locking be...

Spring plungers can be used for locating or for applying pressure, as a detent or for ejection. The running of the ball minimises wear on the counterpart, this also results in a positive locking be...