| | | | |
Picture | | | | Order |
|
|
|
|
from € 209.75* per piece |
|
|
|
|
from € 4.50* per piece |
|
|
Gedore 1207008 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 49.24* per piece |
|
|
Gedore 1211421 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 45.89* per piece |
|
|
Gedore 1211439 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 37.88* per piece |
|
|
Gedore 1552287 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 52.55* per piece |
|
|
Gedore 1552309 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 54.40* per piece |
|
|
Gedore 1552317 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 47.46* per piece |
|
|
Gedore 1565346 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Chrome-vanadium steel, matt chrome-plated. With catch retention. Special sizes available on request. |
|
from € 731.77* per piece |
|
|
Gedore 1565354 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Chrome-vanadium steel, matt chrome-plated. With catch retention. Special sizes available on request. |
|
from € 709.33* per piece |
|
|
Gedore 1565362 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Chrome-vanadium steel, matt chrome-plated. With catch retention. Special sizes available on request. |
|
from € 708.64* per piece |
|
|
Gedore 1565370 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Chrome-vanadium steel, matt chrome-plated. With catch retention. Special sizes available on request. |
|
from € 709.03* per piece |
|
|
Gedore 1565389 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Chrome-vanadium steel, matt chrome-plated. With catch retention. Special sizes available on request. |
|
from € 728.41* per piece |
|
|
Gedore 1565397 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Chrome-vanadium steel, matt chrome-plated. With catch retention. Special sizes available on request. |
|
from € 768.88* per piece |
|
|
Gedore 1565400 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Chrome-vanadium steel, matt chrome-plated. With catch retention. Special sizes available on request. |
|
from € 774.31* per piece |
|
|
Gedore 1565427 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Chrome-vanadium steel, matt chrome-plated. With catch retention. Special sizes available on request. |
|
from € 835.79* per piece |
|
|
Gedore 1933175 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 59.04* per piece |
|
|
Gedore 1963708 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 62.52* per piece |
|
|
Gedore 1963716 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 67.34* per piece |
|
|
Gedore 1963724 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 70.63* per piece |
|
|
Gedore 1966294 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 18.73* per piece |
|
|
Gedore 1966308 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 22.75* per piece |
|
|
Gedore 1966316 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 18.76* per piece |
|
|
Gedore 1977164 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 49.39* per piece |
|
|
Gedore 2170973 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 23.54* per piece |
|
|
Gedore 2171007 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 31.96* per piece |
|
|
Gedore 2171015 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 28.32* per piece |
|
|
Gedore 2171023 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 24.29* per piece |
|
|
Gedore 2212285 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 62.44* per piece |
|
|
Gedore 2312107 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 135.49* per piece |
|
|
Gedore 2659468 open end wrench (1 offer) To operate bolt extractors (no. 8551 and 8551 S) in confined spaces. Reversible for clockwise or counterclockwise operation. Sliding T-handle. With two-jaw chuck to hold square shanks. All steel ve... |
|
from € 115.07* per piece |
|
|
Gedore 2668831 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 20.50* per piece |
|
|
Gedore 2668858 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 24.43* per piece |
|
|
Gedore 2668882 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 35.24* per piece |
|
|
Gedore 2668890 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 29.08* per piece |
|
|
Gedore 2668904 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 40.20* per piece |
|
|
Gedore 6051070 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 20.41* per piece |
|
|
Gedore 6056970 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 22.00* per piece |
|
|
Gedore 6057000 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 25.24* per piece |
|
|
Gedore 6057190 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 18.75* per piece |
|
|
Gedore 6057270 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 21.18* per piece |
|
|
Gedore 6057430 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 22.04* per piece |
|
|
Gedore 6057780 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 23.53* per piece |
|
|
Gedore 6057860 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 28.99* per piece |
|
|
Gedore 6058670 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 29.83* per piece |
|
|
Gedore 6058750 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 37.66* per piece |
|
|
Gedore 6058830 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 49.13* per piece |
|
|
Gedore 6063400 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.55* per piece |
|
|
Gedore 6063590 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 7.31* per piece |
|
|
Gedore 6063670 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.94* per piece |
|
|