| | | | |
| Picture | | | |
|
|
|
|
|
from € 210.39* per piece |
|
|
|
|
from € 4.53* per piece |
|
|
Gedore 1211421 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 39.48* per piece |
|
|
Gedore 1211439 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 37.73* per piece |
|
|
Gedore 1933175 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 59.11* per piece |
|
|
Gedore 1963724 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 70.87* per piece |
|
|
Gedore 1966294 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 18.69* per piece |
|
|
Gedore 1966316 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 18.74* per piece |
|
|
Gedore 1977164 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 49.23* per piece |
|
|
Gedore 2171007 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 29.92* per piece |
|
|
Gedore 2171015 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 27.51* per piece |
|
|
Gedore 2171023 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 24.37* per piece |
|
|
Gedore 2212285 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 67.35* per piece |
|
|
Gedore 2297183 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 65.94* per piece |
|
|
Gedore 2312107 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 139.48* per piece |
|
|
Gedore 2659468 open end wrench (1 offer) To operate bolt extractors (no. 8551 and 8551 S) in confined spaces. Reversible for clockwise or counterclockwise operation. Sliding T-handle. With two-jaw chuck to hold square shanks. All steel ve... |
|
from € 118.73* per piece |
|
|
Gedore 2668882 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 35.33* per piece |
|
|
Gedore 2668890 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 28.33* per piece |
|
|
Gedore 2668904 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 38.53* per piece |
|
|
Gedore 6057190 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 19.59* per piece |
|
|
Gedore 6057270 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 21.19* per piece |
|
|
Gedore 6057780 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 23.54* per piece |
|
|
Gedore 6058750 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 40.32* per piece |
|
|
Gedore 6058830 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 49.37* per piece |
|
|
Gedore 6063400 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.58* per piece |
|
|
Gedore 6063670 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.58* per piece |
|
|
Gedore 6063750 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.18* per piece |
|
|
Gedore 6063830 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 5.40* per piece |
|
|
Gedore 6063910 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.17* per piece |
|
|
Gedore 6064130 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.56* per piece |
|
|
Gedore 6064210 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.16* per piece |
|
|
Gedore 6064480 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.93* per piece |
|
|
Gedore 6064560 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 7.32* per piece |
|
|
Gedore 6064720 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.17* per piece |
|
|
Gedore 6064800 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 6.95* per piece |
|
|
Gedore 6065100 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 8.54* per piece |
|
|
Gedore 6065370 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 7.75* per piece |
|
|
Gedore 6065530 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 9.32* per piece |
|
|
Gedore 6065960 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 10.10* per piece |
|
|
Gedore 6066260 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 10.06* per piece |
|
|
Gedore 6066500 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 10.12* per piece |
|
|
Gedore 6066850 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 11.61* per piece |
|
|
Gedore 6067070 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 12.37* per piece |
|
|
Gedore 6067310 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 13.15* per piece |
|
|
Gedore 6067580 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 12.41* per piece |
|
|
Gedore 6067660 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 14.86* per piece |
|
|
Gedore 6067740 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 15.64* per piece |
|
|
Gedore 6067820 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 17.20* per piece |
|
|
Gedore 6068120 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 17.98* per piece |
|
|
Gedore 6068390 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 35.24* per piece |
|
|
Gedore 6068470 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 44.38* per piece |
|
|
Gedore 6068550 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 46.06* per piece |
|
|
Gedore 6068630 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 51.10* per piece |
|
|
Gedore 6069600 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 35.39* per piece |
|
|
|
|
from € 10.11* per piece |
|
|
|
|
from € 10.87* per piece |
|
|
|
|
from € 14.86* per piece |
|
|
|
|
from € 21.21* per piece |
|
|
Gedore 6077380 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 57.50* per piece |
|
|
Gedore 6077540 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 67.46* per piece |
|
|
Gedore 6077620 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 76.95* per piece |
|
|
Gedore 6077700 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 106.47* per piece |
|
|
Gedore 6077890 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 106.80* per piece |
|
|
Gedore 6078350 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 119.27* per piece |
|
|
Gedore 6380560 open end wrench (1 offer) ISO 6787, jaw set at 15°. Swedish pattern, roller with left hand thread. With scale. Chrome-vanadium steel. Phosphate finish, polished heads. |
|
from € 12.37* per piece |
|
|
Gedore 6380720 open end wrench (1 offer) ISO 6787, jaw set at 15°. Swedish pattern, roller with left hand thread. With scale. Chrome-vanadium steel. Phosphate finish, polished heads. |
|
from € 17.13* per piece |
|
|
Gedore 6380800 open end wrench (1 offer) ISO 6787, jaw set at 15°. Swedish pattern, roller with left hand thread. With scale. Chrome-vanadium steel. Phosphate finish, polished heads. |
|
from € 21.97* per piece |
|
|
Gedore 6380990 open end wrench (1 offer) Acc. to ISO 6787. Jaw set at 15°. Swedish pattern, roller with left hand thread. With scale. Chrome-vanadium steel, chrome-plated, polished heads. |
|
from € 12.43* per piece |
|
|
Gedore 6381290 open end wrench (1 offer) Acc. to ISO 6787. Jaw set at 15°. Swedish pattern, roller with left hand thread. With scale. Chrome-vanadium steel, chrome-plated, polished heads. |
|
from € 25.06* per piece |
|
|
Gedore 6400260 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 26.70* per piece |
|
|
Gedore 6400690 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 44.47* per piece |
|
|
Gedore 6400770 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 57.53* per piece |
|
|
Gedore 6401070 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 94.39* per piece |
|
|
Gedore 6401660 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 204.88* per piece |
|
|
Gedore 6572980 open end wrench (1 offer) Gedore vanadium steel 31CrV3. VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation. Jaw set at 15 °. |
|
from € 22.02* per piece |
|
|
Gedore 6573010 open end wrench (1 offer) Gedore vanadium steel 31CrV3. VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation. Jaw set at 15 °. |
|
from € 21.13* per piece |
|
|
Gedore 6573280 open end wrench (1 offer) Gedore vanadium steel 31CrV3. VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation. Jaw set at 15 °. |
|
from € 24.42* per piece |
|
|
Gedore 6573870 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 4.48* per piece |
|
|
Gedore 6574090 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 4.10* per piece |
|
|
Gedore 6574330 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 5.03* per piece |
|
|
Gedore 6574410 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 5.00* per piece |
|
|
Gedore 6574680 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 5.02* per piece |
|
|
Gedore 6574760 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 6.17* per piece |
|
|
Gedore 6574840 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 5.40* per piece |
|
|
Gedore 6575060 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 6.17* per piece |
|
|
Gedore 6575220 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 6.18* per piece |
|
|
Gedore 6575300 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 6.57* per piece |
|
|
Gedore 6575650 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 7.75* per piece |
|
|
Gedore 6575730 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 14.86* per piece |
|
|
Gedore 6575810 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 9.31* per piece |
|
|
Gedore 6576380 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 10.89* per piece |
|
|
Gedore 6576540 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 11.66* per piece |
|
|
Gedore 6576700 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 14.83* per piece |
|
|
Gedore 6576890 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 17.21* per piece |
|
|
Gedore 6576970 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 17.98* per piece |
|
|
Gedore 6577000 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 21.19* per piece |
|
|
Gedore 6577190 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 28.30* per piece |
|
|
Gedore 6577270 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 32.01* per piece |
|
|
Gedore 6577350 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 39.29* per piece |
|
|
Gedore 6577430 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 52.53* per piece |
|