 | | | | |
Picture | | | | Order |
|
|
|
Gedore 6068470 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 40.34*
per piece |
|
|
Gedore 2668904 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 40.21*
per piece |
|
|
Gedore 7720030 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 39.49*
per piece |
|
|
Gedore 6577350 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 39.45*
per piece |
|
|
Gedore 8033080 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 39.35*
per piece |
|
|
Gedore 6058750 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 37.73*
per piece |
|
|
Gedore 6400500 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 37.72*
per piece |
|
|
Gedore 6677140 open end wrench (1 offer) Opening at right angle to shaft for maximum accessibility. Gedore vanadium steel 31CrV3, chrome-plated. No. 3114 = Delivery without tommy bar. No. DS 3114 = Delivery with tommy bar 26 D. |
|
from € 36.14*
per piece |
|
|
|
|
from € 36.10*
per piece |
|
|
Gedore 6069600 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 35.38*
per piece |
|
|
Gedore 2668882 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 34.58*
per piece |
|
|
Gedore 6588200 open end wrench (1 offer) Acc. to DIN 895, ISO 3318, ISO 1085. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 34x36 mm, steel-grey up from 36x41 mm and larger. * not standardised. |
|
from € 34.44*
per piece |
|
|
Gedore 6574920 open end wrench (1 offer) Gedore vanadium steel 31CrV3. VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation. Jaw set at 15 °. |
|
from € 33.73*
per piece |
|
|
Gedore 6411030 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 32.88*
per piece |
|
|
Gedore 6068390 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 32.84*
per piece |
|
|
