| | | | |
Picture | | | | Order |
|
|
Gedore 6401660 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 205.03* per piece |
|
|
Gedore 6578240 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 200.90* per piece |
|
|
Gedore 2312107 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 139.20* per piece |
|
|
Gedore 2659468 open end wrench (1 offer) To operate bolt extractors (no. 8551 and 8551 S) in confined spaces. Reversible for clockwise or counterclockwise operation. Sliding T-handle. With two-jaw chuck to hold square shanks. All steel ve... |
|
from € 119.29* per piece |
|
|
Gedore 6078350 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 119.22* per piece |
|
|
|
|
from € 110.90* per piece |
|
|
Gedore 6077700 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 106.83* per piece |
|
|
Gedore 6077890 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 106.65* per piece |
|
|
Gedore 6077620 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 77.10* per piece |
|
|
Gedore 6400930 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 74.09* per piece |
|
|
Gedore 1963724 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 70.87* per piece |
|
|
Gedore 2297183 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 70.51* per piece |
|
|
Gedore 6577780 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 70.47* per piece |
|
|
Gedore 6077540 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 67.50* per piece |
|
|
Gedore 2212285 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 67.33* per piece |
|
|