 | | | | |
Picture | | | | Order |
|
|
|
Gedore 6671020 open end wrench (1 offer) Opening at right angle to shaft for maximum accessibility. Gedore vanadium steel 31CrV3, chrome-plated. No. 3114 = Delivery without tommy bar. No. DS 3114 = Delivery with tommy bar 26 D. |
|
from € 98.55*
per piece |
|
|
|
|
from € 106.62*
per piece |
|
|
Gedore 6077700 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 107.07*
per piece |
|
|
Gedore 6577940 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 114.58*
per piece |
|
|
Gedore 6079750 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 114.99*
per piece |
|
|
Gedore 2659468 open end wrench (1 offer) To operate bolt extractors (no. 8551 and 8551 S) in confined spaces. Reversible for clockwise or counterclockwise operation. Sliding T-handle. With two-jaw chuck to hold square shanks. All steel ve... |
|
from € 115.07*
per piece |
|
|
Gedore 6078350 open end wrench (1 offer) Sets of the most used sizes. Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, chrome-plated. |
|
from € 115.20*
per piece |
|
|
Gedore 6401230 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 135.48*
per piece |
|
|
Gedore 2312107 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 135.49*
per piece |
|
|
Gedore 6578080 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 139.79*
per piece |
|
|
Gedore 6401310 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 143.83*
per piece |
|
|
Gedore 6401580 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 163.72*
per piece |
|
|
Gedore 6578240 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 204.85*
per piece |
|
|
Gedore 6401660 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 205.45*
per piece |
|
|
Gedore 6578160 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 217.28*
per piece |
|
|
