| | | | |
Picture | | | | Order |
|
|
|
Gedore 6573520 open end wrench (1 offer) Gedore vanadium steel 31CrV3. VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation. Jaw set at 15 °. |
|
from € 28.96* per piece |
|
|
Gedore 6057860 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 28.99* per piece |
|
|
Gedore 2668890 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 29.08* per piece |
|
|
Gedore 6068200 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 29.79* per piece |
|
|
Gedore 6677060 open end wrench (1 offer) Opening at right angle to shaft for maximum accessibility. Gedore vanadium steel 31CrV3, chrome-plated. No. 3114 = Delivery without tommy bar. No. DS 3114 = Delivery with tommy bar 26 D. |
|
from € 29.79* per piece |
|
|
Gedore 6588120 open end wrench (1 offer) Acc. to DIN 895, ISO 3318, ISO 1085. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 34x36 mm, steel-grey up from 36x41 mm and larger. * not standardised. |
|
from € 29.80* per piece |
|
|
Gedore 6058670 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 29.83* per piece |
|
|
Gedore 2171007 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 31.96* per piece |
|
|
Gedore 6577270 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 32.05* per piece |
|
|
Gedore 6670210 open end wrench (1 offer) Opening at right angle to shaft for maximum accessibility. Gedore vanadium steel 31CrV3, chrome-plated. No. 3114 = Delivery without tommy bar. No. DS 3114 = Delivery with tommy bar 26 D. |
|
from € 32.60* per piece |
|
|
Gedore 6068390 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 32.76* per piece |
|
|
Gedore 6676920 open end wrench (1 offer) Opening at right angle to shaft for maximum accessibility. Gedore vanadium steel 31CrV3, chrome-plated. No. 3114 = Delivery without tommy bar. No. DS 3114 = Delivery with tommy bar 26 D. |
|
from € 32.81* per piece |
|
|
Gedore 6574920 open end wrench (1 offer) Gedore vanadium steel 31CrV3. VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation. Jaw set at 15 °. |
|
from € 33.73* per piece |
|
|
Gedore 6400420 open end wrench (1 offer) For very heavy-duty work. Acc. to DIN 133. Up to length 500 mm chrome-vanadium steel 31CrV3, above 525 mm material C35. Special sizes available on request. * not standardised. |
|
from € 34.45* per piece |
|
|
Gedore 6588200 open end wrench (1 offer) Acc. to DIN 895, ISO 3318, ISO 1085. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 34x36 mm, steel-grey up from 36x41 mm and larger. * not standardised. |
|
from € 34.51* per piece |
|
|