For highest accuracy with high rotational precision. This includes: 1 face plate, 2 fixed centres (MK 2 and MK 1/short) and 1 drive dog. Packed in a wooden box.
For high precision machining of round parts. The collet set is mounted instead of the lathe chuck. With 8 collets (2 - 2.5 - 3 - 4 - 5 - 6 - 8 and 10mm). Packed in a wooden box.
Sizes: M 3 - 4 - 5 - 6 - 8 - 10. The straight shaft fits the holder Ø 10mm when mounted in the tailstock of the PD 230/E. The holder is held by hand while cutting the threads. Comes in a wooden box.
This holder allows mounting of our rotary tool IB/E (collar size 4/5" (20 mm)) to the tool post of the Lathe PD 230/E for grinding or polishing purposes. For use with the Lathe PD 230/E. Can also b...
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equiv...
Made of steel. Complete with 2 step blocks, 2 clamps, 2 nuts and 2 T-slot nuts for MICROMOT standard 29/64" x 7/16" x 5/32" (11.5 x 11 x 4 mm). Supplied in a wooden box. For use with the lathe syst...
For work pieces up to 35mm thickness. Two each step blocks and clamps. With matching nuts and screws for fixation in T-slots of the MICROMOT standard (12 x 6 x 5mm). Supplied in wooden box with sli...
Used to clamp various work pieces. Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90°. Size 50 x 30 x 30mm. The solid clamp and knurled knob...
Ground in pairs For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 - 62 HRC). Parallel accuracy 0.002mm. 2 each of 8 x 10, 15, 20, 25, 30, ...
Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes and raised base to secure the lathe are pre-drilled. Seeping through of coolant is impossible. Length 8...
Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm.
Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous T-slots. With clamping jaws.
Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive/ face plate with 30mm bore as well as reducing bushes 30/20mm and 30/15mm. A threaded drive pin ...
For accurate use on round components. One hardened collet each hardened collet 2.0 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0 - 10 - 12 and 14mm are included. Concentric accuracy better than 0.002mm, much bette...
Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Neatly packed in a wooden box.
Three holders (90mm long): - for roughing out; - for longitudinal work; - for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55°, plated (commercially available version). Three additi...
Three holders (90mm long): - for roughing out; - for longitudinal work; - for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55°, plated (commercially available version). Three additi...
Highest quality set with the most frequently used chisels: tube chisel, flat chisel, pointed chisel, anvil chisel and finishing chisel. Neatly packed in a wooden box. - For use with the Micro Woodt...
Used to clamp asymmetrical pieces such as rectangles. - Reversible jaws clamp from 0 to 1-3/8" (0 to 35mm) inside and 35/64" to 2-5/8" (14 to 67mm) outside. - The chuck has a M16 x 1 thread for fit...
Used to clamp concentric pieces such as round pieces. - Reversible jaws clamp from 1/16" to 1-3/8" (1.5 to 32mm) inside and 1/2" to 2-19/32" (12 to 65mm) outside. - The chuck has a M16 x 1 thread f...