Lathe Accessories (30 items)

Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm.

Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm.

The jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm.

The jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm.

Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous T-slots. With clamping jaws.

Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive/ face plate with 30mm bore as well as reducing bushes 30/20mm and 30/15mm. A threaded drive pin ...

Including two holders. Provides quick tool changes with easy height adjustment.

Used in the PD 400 quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt.

For accurate use on round components. One hardened collet each hardened collet 2.0 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0 - 10 - 12 and 14mm are included. Concentric accuracy better than 0.002mm, much bette...

Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Neatly packed in a wooden box.

Three holders (90mm long): - for roughing out; - for longitudinal work; - for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55°, plated (commercially available version). Three additi...

Three holders (90mm long): - for roughing out; - for longitudinal work; - for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55°, plated (commercially available version). Three additi...

Highest quality set with the most frequently used chisels: tube chisel, flat chisel, pointed chisel, anvil chisel and finishing chisel. Neatly packed in a wooden box. - For use with the Micro Woodt...

Used to clamp asymmetrical pieces such as rectangles. - Reversible jaws clamp from 0 to 1-3/8" (0 to 35mm) inside and 35/64" to 2-5/8" (14 to 67mm) outside. - The chuck has a M16 x 1 thread for fit...

Used to clamp concentric pieces such as round pieces. - Reversible jaws clamp from 1/16" to 1-3/8" (1.5 to 32mm) inside and 1/2" to 2-19/32" (12 to 65mm) outside. - The chuck has a M16 x 1 thread f...