Weight: 200g Mounting set for fixing 19” device into a cabinet Material: Zinc plated Steel, plastic Content: Screw, plastic washer, cage nut Diameter: 6 mm (M6) Set of 20 or 50 pcs.
LogiLink’s M6 cage-nut and screw hardware pack for mounting equipment into cage-nut vertical mounting rails. The pack includes 20pc of M6 cage-nuts, screws and washers.
Use your 2.5" HDD/SSD in a 3.5" slot. Just mount one or even two 2.5" HDDs onto the mounting frame and you are ready to use them both! Because of its small size, the hard disk mounting bracket from...
Easy mounting of your IDE/SATA HDD/SDD with your PC: Just slide the HDD into LogiLink’s Bracket for 1-Bay 2.5” HDD/SSD, screw it together and secure it with another screw to the PC. After installin...
These sturdy brackets are perfect for attaching devices to standard DIN rails. This item consists of 2 stainless steel brackets with screw. They are designed to fit perfectly with standard 35 mm ra...
Weight: 3kg 19" Cantilever shelf 2 U, 430x400m Material: 1.5 mm steel Maximum static load: 25 kg Finish: Electrostatic powder paint Color: RAL7035 light grey or RAL 9005 black
3M™ Bumpon™ Protective Product SJ5007 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The flat top shape provides increased load bearing capacity and better wear re...
Protective Product SJ5744 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The cylindrical - flat top provides excellent load bearing and anti-skid performance. - Al...
Two-Way Mounting Base, Black Nylon 6.6 for Temperatures up to 85 Degrees Celsius (185 F), Weather and Ultraviolet Resistant, Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of...
Two-Way Detectable Mounting Base, Detectable Blue Nylon 6.6 for Temperatures up to 65 Degrees Celsius (149 F), Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 6.4mm (0.25 I...
Two-Way Detectable Mounting Base, Detectable Blue Polypropylene for Temperatures up to 65 Degrees Celsius (149 F), Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 6.4mm (0....
Four-Way and Two-Way Mounting Base With Open Leg Design, Detectable Blue Nylon 6.6 for Temperatures up to 65 Degrees Celsius (149 F), Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), ...
Fast and clean installation without drilling. - Easy attachment and removal of the smoke alarm device with magnet connection. The magnet fastening set offers an ideal alternative for smoke alarm de...
ADDER mounting products, including rackmount kits and desk or wall mount kits, are designed to enable easy installation within your chosen environment. RMK10 is a desk or wall mount kit for ADDERLi...
ADDER rackmount products are designed to enable easy installation within the rack environment. The RMK12 is a 19" 1U rackmount kit for 2 x ADDERLink INFINITY 4000 Series units. It is a tray designe...
ADDER Rackmount Kits are designed to enable easy installation within the rack environment. The RMK4D-R2 is a 19" Rackmount 1U Kit for 2 units: ADDERLink INFINITY, ADDERView CATx 1000 (8 and 16 port...
ADDER Rack Mount Kits are designed to enable easy installation within the rack environment. The RMK4V is a VESA Mounting Bracket for ADDERLink Receiver Units, Single ADDERLink 199mm Wide Products, ...
ADDER Rackmount products are designed to enable easy installation within the rack environment. RMK5PRO-MS is a Rackmount Kit for the AV4PRO MultiScreen Series.
ADDER Rackmount Kits are designed to enable easy installation within the rack environment. This rackmount kit enables two of the following products to be mounted side by side in 1U of a rack. RMK8 ...