BEL Air ventilation element set, for preventing condensation build-up in enclosure, for vertical installation in enclosure walls and GFL combi flanges with corresponding knock-outs, at least two ve...
External fixing lugs, for mounting separate enclosures or small units on flat wall surfaces, can be fixed to the box base at an angle of 0°, 45°, or 90°, wall gap 7 mm, material stainless steel, su...
External hinge set for retrofitting the enclosure cover to hinged door, incl. 2 hinges, fixing screws, cover plugs and drilling template External hinge set small, TK PS/PC 77 bis TK PS/PC 1809
Ventilation Plug, IP44, with ventilation seal to avoid condensation formation in enclosures, flow rate 100 l/min. at 0.1 bar overpressure, thermoplastic elastomer, grey, recommended for insertion o...
Double membrane seals with two sealing membranes, closed, max. four cable insertions for control lines, thermoplastic elastomer (TPE), grey, for wall thicknesses 1.5 - 4.5 mm
Stepped nipple with closed sealing membrane, can be cut into multiple steps, thermoplastic elastomer (TPE), grey, for wall thicknesses from 1.5 - 4.0 mm
Stepped nipple with closed sealing membrane, can be cut into multiple steps, thermoplastic elastomer (TPE), grey, for wall thicknesses from 1.5 - 4.0 mm
Stepped nipple with closed sealing membrane, can be cut into multiple steps, thermoplastic elastomer (TPE), grey, for wall thicknesses from 1.5 - 4.0 mm
Stepped nipple with closed sealing membrane, can be cut into multiple steps, thermoplastic elastomer (TPE), grey, for wall thicknesses from 1.5 - 4.0 mm
Interior hinge set for retrofitting the housing cover to a hinged door, incl. 2 hinges, fixing screws and drilling template for TG 1612, TG 2012, TG 2015, TG 2516, TG 3023