Mounting Kits (278 items)

A Standard Duty Pedestal Mount for a stable installation of your device in any vehicle and on any flat surface. Easy to set in any angle and position thanks to ball heads which tilt 210° and swivel...

A Standard Duty Pedestal Mount for a stable installation of your device in any vehicle and on any flat surface. Easy to set in any angle and position thanks to ball heads which tilt 210° and swivel...

A Standard Duty Pedestal Mount for a stable installation of your device in any vehicle and on any flat surface. Easy to set in any angle and position thanks to ball heads which tilt 210° and swivel...

A Heavy Duty Pedestal Mount for a stable installation of your device in any vehicle and on any flat surface. Easy to set in any angle and position thanks to ball heads which tilt 210° and swivel 36...

Pedestal Mount extension arm. Total length: 170 mm. With ball head. For use with item no 202010-202020. A extension arm for use with Standard Duty Pedestal Mount for a stable installation of your d...

Magnetic mount, 88 mm. With ball that fits with standard duty pedestal ball mount arm, item no 202010, 202011, 202012, 202014, 202015, 202016, 202017, 202018, 202019, 202020. Magnetic mount, 88 mm....

Magnetic mount, 43 mm. With ball that fits with standard duty pedestal ball mount arm, item no 202010, 202011, 202012, 202014, 202015, 202016, 202017, 202018, 202019, 202020. Magnetic mount, 43 mm....

Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front pi...

MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm. Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape...

Mounting plate angle. 3-pack. Can be used for installation of two devices placed in different height on the same ProClip. (3pcs/pack).

Mounting plate dual, in black ABS plastic (3 pieces/pack) The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes w...

ABS-plastic, black. 5 mm. 4 à 80x420, 4 à 120x420, 2 à 160x420, 1 à 200x420. Set with sheets of black ABS-plastic, 5 mm thickness. Allows you to make your own special solutions. Consists of: 4 pcs ...

Tilt swivel. With två face plates (parallell center point) The choice when you want to install two units e.g. a holder for a PDA and a HF-kit. With predrilled holes for Nokia and Sony Ericsson Orig...

For GPS remote control Attention! Read all instructions before attaching the ProClip. Peel off both adhesive tape covers on the ProClip. 1. Press the angled edge of the upper part of the ProClip in...

Mounting plate with Tilt Swivel, centered. Low Smaller, lower face plate. The choice for an adjustable monitor angle. Fits monitors with a vertical slot in back.Install onto ProClip.

The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws and adhesive tape on the back. With predrilled ...

Cover plate to be placed in compartment in the console to the left in Chevrolet Trans Sport 97- .

Adapter plate for LCD-screen without groove in backside, for ProAdapt. The choice when you want to install a monitor without a vertical slot on the back (with a hole underneath for thumb screw atta...

Angled mounting platform, 30°. Attach with adhesive tape to flat, horizontal surface. Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.

Angled mounting platform, 45°. Attach with adhesive tape to flat, horizontal surface. Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.

Angled mounting platform, 60°. Attach with adhesive tape to flat, horizontal surface. Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.

MoveClip for Tilt swivel, with predrilled holes. 1 female + 1 male + 2 screws. 50 x 42 x 5 mm. The Move Clip system is basically a female plate with a wide V-slot and a male plate that is shaped to...

Extra strength mounting platform for taxameter. Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting pl...

Extra strength mounting platform for taxameter. Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting pl...

Mounting Platform for Taxameter Compact 20 + printer RX60, Center mount right Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it...

Taxameter Holder Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimi...

Holder to Taxameter, Compact RX80. top mounted.

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

For taxameter. Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimize...

Mounting Platform for Taxameter Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The plac...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device ...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device ...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra strength mounting platform. Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The pl...

Extra strength mounting platform. Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The pl...

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

Extra high mounting platform. Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placem...

Attaching mount, adjustable sideways and in height, and tilts. TomTom Go has been available for some time now, and it is a big success! Keep your unit in a holder attached to the dashboard, and you...

Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip.

The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spri...

The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spri...

Plate with predrilled AMPS holes. 7x42x50 mm. Used for positioning the installed equipment further away from the dashboard. Dimensions: 7x42x50 mm.

Mounting plate with Richter adapter, with tilt swivel.

Device mounting adapter, Male piece. AMPS-standard holes. Use with item 215053, 215054 or 215055. Device mounting adapter, male piece. Is to be used with item 215053, 215054 or 215055. With this ex...

Device mounting Female adapter, AMPS-standard holes. To 215053. The Device Mounting Adapter accommodates all Devices/Device Cradles that have the AMPS hole pattern (a square like hole pattern) in t...

Motorcycle mount, is to be installed on the handle bar. To be used for installation of a PNA, GPS device, PDA etc. The mount is equiped with a tilt swivel, so you can adjust the device in order to ...

Note-pad holder with tilt swivel. Holder for note pad, with tilt swivel. Attach onto ProClip Mounting Platform. (Note pad and pen are not included.) Attention! Read all instructions before attachin...

Note-pad holder with tilt swivel. Note-pad and pen included. Holder for note pad, with tilt swivel. Attach onto ProClip Mounting Platform. Note pad and pen included. Attention! Read all instruction...

Mounting plate, with tilt swivel. Attention! Read all instructions before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the attaching part on the back. 2. ...

Mounting plate with tilt swivel.

Extension plate, 143x50x5mm. With predrilled AMPS holes. The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder...

A small, oval face plate with predrilled holes for Nokia and Sony Ericsson Original HF-kits, Brodit holders and THB HF-kits. Can be angled 15° in every direction.

Please read all of the instructions and look at the pictures before attaching the mount. 1. Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back...

Please read all of the instructions and look at the pictures before attaching the mount. 1. Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back...

Fuse 2 A, with holder. Can be used with Brodit active holders for fixed installation, e.g. holders with Molex adapter system, holders with speaker or Handsfree Car Kit.

Mounting plate for installation of Tablet PCs, touch screens etc. Consists of one back piece and one front piece. Comes with adhesive tape on the back.

Extension mounting plate, angled 10°. With 6 predrilled holes. Used for angle the installed equipment and to get it further away from the dashboard. Angled 10°. The plate is 50x50 mm, thickness 14-...

Extension mounting plate, angled 15°. With 6 predrilled holes. Used for angle the installed equipment and to get it further away from the dashboard. Angled 15°. Tha plate is 50x50 mm, thickness 18-...

Tap Splice with Crimp Terminal and Fuse 2 A, with holder. Can be used with Brodit active holders for fixed installation, e.g. holders with Molex adapter system, holders with speaker or Handsfree Ca...

Flexible arm, 15 cm. With predrilled AMPS-standard holes. A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to...

The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws, Size: 100x50x5mm

Extra heavy foot. With face plate with predrilled holes.

Horizontal adapter Plate, for Arkon. A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on t...

A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. The moun...

Mounting plate with a big strong tilt swivel for installation of heavier devices such as larger monitors, laptops etc. Allows you to adjust the angle of the device and provides a flexible yet firm ...

A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. The moun...

Vertical adapter plate for Arkon. A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the ...

A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Attach o...

Angled mount for a higher placement. With predrilled holes. The choice when you want to install equipment in a higher position, for example to get the device higher up when installing onto a Consol...

Horizontal adapter plate with tilt swivel, for Arkon. Singel T. A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached ont...

Mount for device with a TMC module. The choice when you want to get a firm installation on a ProClip Mounting Platform instead of using a suction cup mount. You can easily adjust the angle of your ...

Mount for device with a TMC module. The choice when you want to get a firm installation on a ProClip Mounting Platform instead of using a suction cup mount. You can easily adjust the angle of your ...

The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehic...

The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spri...

With MoveClip. Fits for DDS MC1700. Please read all of the instructions and look at the pictures before attaching the mount. 1. Place the monitor with the display facing downwards. Place the mount ...

More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving th...

Self tapping screws for ABS plastic, used when making own special mounting solutions.

Motorcycle mount with tilt swivel plate, predrilled AMPS holes. 31,8 mm diameter. Motorcycle mount, is to be installed on the handle bar. To be used for installation of a PNA, GPS device, PDA etc. ...

Mounting Accessorie

Fits diameter 19-30 mm. Face plate angled 45°. For installation of devices on pipes and stays, for example all kind of vehicles, on motorcycles, boats, carts, stands, wheelchairs, airplanes etc. Th...

Used for installation of a display for Bury CC9060 onto a ProClip Mounting Platform instead of onto a vertical surface. You can adjust the display in order to avoid light reflecion. The cable can p...

Mounting plate (80x50x5mm). AMPS-standard. The choise when you want to install your device positioned a bit to the left or right than the center of the ProClip. Predrilled holes, AMPS standard. Mad...

Extension plate, 155x50x5mm. With predrilled AMPS holes. The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder...

Flexible arm, 25 cm. With predrilled AMPS-standard holes. A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to...