Mounting Kits (29 items)

3M™ Bumpon™ Protective Product SJ5007 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The flat top shape provides increased load bearing capacity and better wear re...

Protective Product SJ5744 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The cylindrical - flat top provides excellent load bearing and anti-skid performance. - Al...

Use this projector installation kit to install your projector above your suspended ceiling tile. Use with universal mount and extension arm. - Cable Suspension System for quick and easy tie-off - I...

This RAM-2461U consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. The RAM-2461...

This RAM-2461U-EXT1 consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. Included on the plate is a 3/8"-16 tapped hole. The rubber ball is posit...

The RAM-D-202U-23 contains a 2.25" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 2.5" center to center.

The RAP-B-200-2 consists of double 1" diameter open ball sockets with a 360 rotation point at the center and a connecting swivel joint that rotates forward and back 180. The rubber ball and socket ...

The RAM-B-201, STANDARD length double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and...

The RAM-201-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket ...

The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and soc...

The RAM-201, standard length double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and...

The RAM-224U consists of a 3.3" twist lock suction cup base that is connected to the (RAM-238), diamond base with 1.5" rubber ball. The suction cup is designed to have an extra strong hold on any s...

The RAM-B-202 consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPs hole pattern.

The RAM-202 consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.