 | | | | |
Picture | | | | Order |
|
|
|
|
from € 1.02*
per piece |
|
|
|
|
from € 1.54*
per piece |
|
|
|
Ergonomic Solutions SP1-P22116-02 |
from € 1.54*
per piece |
|
|
Brodit 861982 mounting kit (1 offer) A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With an angled, thin end. Made in black ABS plastic. |
|
from € 1.55*
per piece |
|
|
Brodit 861981 mounting kit (1 offer) A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With a thin end. Made in black ABS plastic. |
|
from € 1.55*
per piece |
|
|
|
|
from € 2.02*
per piece |
|
|
|
|
from € 2.03*
per piece |
|
|
|
|
from € 2.05*
per piece |
|
|
|
|
from € 2.58*
per piece |
|
|
|
|
from € 3.08*
per piece |
|
|
|
|
from € 3.08*
per piece |
|
|
|
|
from € 3.09*
per piece |
|
|
|
|
from € 3.09*
per piece |
|
|
|
|
from € 3.54*
per piece |
|
|
|
Ergonomic Solutions SPA143 |
from € 3.85*
per piece |
|
|
Brodit Mounting Accessories (1 offer) A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With thin ends, one pointy and one level end. Manufacutred in black ABS plastic. |
|
from € 4.03*
per piece |
|
|
|
RAM Mounts RAM-HAR-MET-NCB |
from € 4.05*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Plate with predrilled AMPS holes. 7x42x50 mm. Used for positioning the installed equipment further away from the dashboard. Dimensions: 7x42x50 mm. |
|
from € 4.07*
per piece |
|
|
|
|
from € 4.07*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip. |
|
from € 4.08*
per piece |
|
|
|
|
from € 4.08*
per piece |
|
|
|
|
from € 4.08*
per piece |
|
|
|
|
from € 4.08*
per piece |
|
|
|
|
from € 4.09*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Fuse 2 A, with holder. Can be used with Brodit active holders for fixed installation, e.g. holders with Molex adapter system, holders with speaker or Handsfree Car Kit. |
|
from € 4.57*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Extension plate, 155x50x5mm. With predrilled AMPS holes. The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder... |
|
from € 4.57*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Vertical Mounting plate (155x50x5mm). The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder. With predrilled h... |
|
from € 4.57*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Mounting plate (80x50x5mm). AMPS-standard. The choise when you want to install your device positioned a bit to the left or right than the center of the ProClip. Predrilled holes, AMPS standard. Mad... |
|
from € 4.57*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Female cigg-plug with open ends for fixed installation. Cigarette lighter socket with open ends for fixed installation. Is to be used when you want to use an active holder with cigarette lighter pl... |
|
from € 4.58*
per piece |
|
|
RAM Mounts X-Grip Tether for Phone Mounts (1 offer) RAM's X-Grip is one of the best-selling, most trusted device mounts on the market. The X-Grip provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environme... |
|
from € 4.58*
per piece |
|
|
RAM Mounts Composite Double Octagon Button (1 offer) The coupler is to combine 2 RAP-B-200-1U and/or RAP-200-1U to form a double socket arm with the capability to rotate 360 in the center of the arm. This will also give the ability to have a B size 1... |
|
from € 4.59*
per piece |
|
|
|
|
from € 4.59*
per piece |
|
|
|
|
from € 4.78*
per piece |
|
|
Brodit Mounting Accessories (1 offer) The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws and adhesive tape on the back. With predrilled ... |
|
from € 5.06*
per piece |
|
|
RAM Mounts Snap-Link Short Double Ball Adapter (1 offer) The RAP-SBA-RRU consists of a 1.43" overall length arm with double RAM-to-RAM balls at each end. This arm serves as middle attachment point between the RAM-HOL-UN7U and RAP-SB-187BU . |
|
from € 5.06*
per piece |
|
|
RAM Mounts Snap-Link Short Ball Adapter for Garmin (1 offer) The RAM-to-Garmin double ball adapter arm will attach to the EZ-Strap base , making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates th... |
|
from € 5.06*
per piece |
|
|
|
Ergonomic Solutions SPUF101-02 |
from € 5.06*
per piece |
|
|
Brodit 215484 mounting kit (1 offer) Mounting plate Extension plate, 149x69x5 mm. The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws an... |
|
from € 5.07*
per piece |
|
|
Brodit Mounting Accessories (1 offer) The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws, Size: 100x50x5mm |
|
from € 5.07*
per piece |
|
|
|
|
from € 5.07*
per piece |
|
|
RAM Mounts RAM-119TCU mounting kit (1 offer) Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon... |
|
from € 5.07*
per piece |
|
|
|
|
from € 5.07*
per piece |
|
|
|
|
from € 5.07*
per piece |
|
|
|
|
from € 5.07*
per piece |
|
|
|
|
from € 5.07*
per piece |
|
|
|
RAM Mounts RAP-TRACK-EXA-CCU |
from € 5.08*
per piece |
|
|
|
RAM Mounts RAM-HAR-MET-TAB1U |
from € 5.08*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Vertical Mounting plate (155x50x5mm). The extension plate makes it possible to attach two devices with tilt swivel onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder. ... |
|
from € 5.08*
per piece |
|
|
|
Ergonomic Solutions SPMCL101-02 |
from € 5.08*
per piece |
|
|
|
|
from € 5.08*
per piece |
|
|
|
|
from € 5.08*
per piece |
|
|
RAM Mounts X-Grip Tether for Large Phone Mounts (1 offer) RAM's X-Grip is one of the best-selling, most trusted device mounts on the market. The X-Grip provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environme... |
|
from € 5.08*
per piece |
|
|
|
|
from € 5.08*
per piece |
|
|
|
|
from € 5.08*
per piece |
|
|
|
|
from € 5.09*
per piece |
|
|
RAM Mounts RAP-395WU mounting kit (1 offer) Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon... |
|
from € 5.09*
per piece |
|
|
Brodit Device Mounting Adapter (1 offer) Device mounting Female adapter, AMPS-standard holes. To 215053. The Device Mounting Adapter accommodates all Devices/Device Cradles that have the AMPS hole pattern (a square like hole pattern) in t... |
|
from € 5.60*
per piece |
|
|
RAM Mounts Composite Octagon Button with Round Plate (1 offer) The High Strength Plastic Universal Plate has a 1.0"diameter Round Male Button on an Octagon Neck, connected at right angles to a 2.5" diameter Round Plate. The plate has four holes that match the ... |
|
from € 5.60*
per piece |
|
|
|
|
from € 5.65*
per piece |
|
|
|
|
from € 5.66*
per piece |
|
|
|
|
from € 5.66*
per piece |
|
|
|
|
from € 5.66*
per piece |
|
|
Brodit Device Mounting Adapter (1 offer) Device mounting adapter, Male piece. AMPS-standard holes. Use with item 215053, 215054 or 215055. Device mounting adapter, male piece. Is to be used with item 215053, 215054 or 215055. With this ex... |
|
from € 5.67*
per piece |
|
|
RAM Mounts Snap-Link Long Double Ball Adapter (1 offer) The RAP-SBA-RRLU consists of a 3" overall length arm with double RAM-to-RAM balls at each end. This arm serves as middle attachment point between the RAM-HOL-UN7U and RAP-SB-187BU . |
|
from € 5.67*
per piece |
|
|
RAM Mounts PVC to 3/4" PVC Pipe Adapter (1 offer) The RAP-PPA-MRM75 consists of a male to male slip pipe socket coupler. The socket can connect to any RAM PVC pipe and can be permanently fastened using electrical tape or PVC pipe cement. Intended ... |
|
from € 5.67*
per piece |
|
|
|
|
from € 5.67*
per piece |
|
|
RAM Mounts Snap-Link Long Ball Adapter for Garmin (1 offer) The RAM-to-Garmin double ball LONG arm will attach to the EZ-Strap base , making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates the G... |
|
from € 5.67*
per piece |
|
|
RAM Mounts RAP-SB-275-MFU mounting kit (1 offer) Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon... |
|
from € 5.67*
per piece |
|
|
|
|
from € 5.67*
per piece |
|
|
|
|
from € 5.67*
per piece |
|
|
RAM Mounts Snap-Link Socket with Diamond Plate (1 offer) The RAP-SB-238FU consists of 2.43" x 1.31" composite diamond base with female socket. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will c... |
|
from € 5.68*
per piece |
|
|
RAM Mounts RAP-SB-275-FF1U mounting kit (1 offer) Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon... |
RAM Mounts RAP-SB-275-FF1U |
from € 5.68*
per piece |
|
|
RAM Mounts Tele-Pole Rubber Cap (1 offer) The RAM-VP-CAP1 is a protective cap that covers lower RAM Tele-Pole in your vehicle when it is not supporting your upper pole & swing arm assembly. If you ever need to temporarily remove your lapto... |
|
from € 5.68*
per piece |
|
|
RAM Mounts X-Grip Rubber Cap 4-Pack Replacement (2 offers) The RAP-UN-CAP-4U consists of (4 qty) post caps that are an accessory for all RAM X-Grip cradles and mounts. Optional super glue is included to offer extra security of the rubber caps on your RAM X... |
|
from € 5.69*
per piece |
|
|
|
Ergonomic Solutions P22-00095 |
from € 6.11*
per piece |
|
|
RAM Mounts RAP-300-1SU mounting kit (1 offer) Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon... |
|
from € 6.15*
per piece |
|
|
|
|
from € 6.17*
per piece |
|
|
|
|
from € 6.18*
per piece |
|
|
RAM Mounts Snap-Link Ball with Diamond Plate (1 offer) The RAP-SB-238U, composite diamond base, contains a 0.75" high strength composite ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to c... |
|
from € 6.18*
per piece |
|
|
RAM Mounts RAP-SB-275-FFU mounting kit (1 offer) Introduced in 1995 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phon... |
|
from € 6.18*
per piece |
|
|
|
|
from € 6.18*
per piece |
|
|
|
|
from € 6.18*
per piece |
|
|
Brodit 215578 mounting kit (1 offer) Mounting plate Shifted to the right. To be used when you need to mount a holder slightly pushed aside from the ProCLip's reglar point of attachment. Comes with 4 screws. Four predrilled holes. |
|
from € 6.65*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Tap Splice with Crimp Terminal and Fuse 2 A, with holder. Can be used with Brodit active holders for fixed installation, e.g. holders with Molex adapter system, holders with speaker or Handsfree Ca... |
|
from € 6.66*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Extension mounting plate, angled 15°. With 6 predrilled holes. Used for angle the installed equipment and to get it further away from the dashboard. Angled 15°. Tha plate is 50x50 mm, thickness 18-... |
|
from € 6.66*
per piece |
|
|
RAM Mounts PVC Socket to 3/4" PVC Pipe Adapter (1 offer) The RAP-PPA-FRM75 consists of 2 female slip pipe socket for 3/4" to 1/2" reducer. The socket can connect to any RAM PVC pipe and can be permanently fastened using electrical tape or PVC pipe cement... |
|
from € 6.66*
per piece |
|
|
Brodit Mounting Accessories (1 offer) Extension mounting plate, angled 10°. With 6 predrilled holes. Used for angle the installed equipment and to get it further away from the dashboard. Angled 10°. The plate is 50x50 mm, thickness 14-... |
|
from € 6.67*
per piece |
|
|
|
|
from € 6.67*
per piece |
|
|
RAM Mounts X-Grip Tether for 7"-8" Tablet Mounts (1 offer) RAM's X-Grip is one of the best-selling, most trusted device mounts on the market. The X-Grip provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environme... |
|
from € 6.67*
per piece |
|
|
|
|
from € 6.68*
per piece |
|
|
RAM Mounts Leash Cup (1 offer) The RAM Leash Cup is the perfect complement to the RAM Leash Plug Adapter. If you are manufacturing surfboards, stand-up paddle boards or similar watercraft, consider integration of the RAM system ... |
|
from € 6.68*
per piece |
|
|
RAM Mounts Tough-Tray Flat Arm (1 offer) The RAM RAM-234K1U, flat side keeper, attaches to the RAM-234-3 RAM Tough-Tray. The side keeper allows for your laptop to close completely while in the RAM Tough-Tray. This part is a single Flat Arm. |
|
from € 6.69*
per piece |
|
|
|
RAM Mounts RAP-TRACK-DR-3U |
from € 6.69*
per piece |
|
|
|
RAM Mounts RAP-TRACK-DR-4U |
from € 6.69*
per piece |
|
|
Brodit Mounting Accessories (2 offers) Universal mount for slot button and clip holder. With predrilled holes. Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip. |
|
from € 6.74*
per piece |
|
|
|
|
from € 6.83*
per piece |
|
|
|
|
from € 6.90*
per piece |
|
|
RAM Mounts Stainless Steel U-Bolt Hardware Pack (1 offer) The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that c... |
|
from € 7.11*
per piece |
|
|
|
|
from € 7.16*
per piece |
|
|
|
|
from € 7.16*
per piece |
|
|
