Industrial Networks (66 items)

The analog input module processes signals of a standard magnitude 0–10V. The input signal is electrically isolated and is transmitted with a resolution of 12 bits. The internal system supply powers...

The analog input module processes signals of a standard magnitude 4–20mA. The input signal is electrically isolated and is transmitted with a resolution of 12 bits. The internal system supply power...

The analog output module generates signals of a standard magnitude 4–20mA. The output signal is electrically isolated and transmitted with a resolution of 12 bits. Power is derived from the field s...

Manufacturer: PHOENIX CONTACT Mounting: for DIN rail mounting Type of industrial module: antenna

Axioline F, Backplane, 4 slots for Axioline Smart Elements, transmission speed in the local bus: 100 Mbps, degree of protection: IP20

Axioline F, Backplane, 6 slots for Axioline Smart Elements, transmission speed in the local bus: 100 Mbps, degree of protection: IP20

After the fieldbus node is assembled with the correct buscoupler and I/O modules, the end module is snapped onto the assembly. It completes the internal data circuit and ensures correct data flow.

Bus Extension End Module The end module for the internal data bus extension 750-627 is attached to the end of the I/O terminal block like the standard end module 750-600. The block is terminated wi...

The serial interface module connects RS‐485/422 or RS-232 C interface devices to the WAGO-I/O-SYSTEM 750. It also provides gateways between the serial interface and the fieldbus systems supported b...

MP-Bus Master The 750-643 I/O module acts as a master for the MP bus (Multi Point Bus from Belimo/Switzerland) and allows the bus to be integrated into a higher level bus network such as Ethernet o...